![]() ![]() Connect a different monitor or television and reboot. Windows gives you about 15 seconds to decide on keeping the new monitor settings or reverting to the original settings. Press the Esc key shortly after selecting the new display mode to undo the selection.If your monitor display becomes unreadable after selecting a display mode, recover by doing one of the following: Then, select the desired display mode from the list and click OK. If the display mode or resolution is still not selectable, click Start, Control Panel, Display, Settings, Advanced, Adapter, and List all modes.To change this setting, click Start, Control Panel, double-click Display, click Settings tab, Advanced button, and Monitor tab.Some computer manufacturers do not support deselecting this setting. Check with your computer manufacturer regarding the use of this setting. Verify with the monitor manufacturer that the monitor can support the display mode you want. We are not responsible for resulting damage from use of this setting. Cautionĭeselecting the setting Hide modes that this monitor cannot display and then selecting a display mode your monitor is unable to process can cause damage. This setting cannot be selected in Windows 7 or 8. Windows XP users, verify that your monitor supports the resolution you want and deselect this Windows setting: Hide modes that this monitor cannot displayĭeselecting this setting allows the display mode or resolution to be selectable if supported by the monitor.You can now select the largest resolutions for each monitor. Select Extended Desktop mode and click apply. Right-click on your Desktop and select Graphics Properties.To set a separate resolution for each display, select Extended Desktop mode: In Clone mode, the resolution defaults to the highest resolution supported by both displays. If set to Clone mode, switch to Extended Desktop mode.Displays (especially TVs or HDTVs) can only support their large native resolution using a digital DVI, HDMI, or DisplayPort* connector. Some documentation lists the VGA connector as a D-sub input. Check the user guide or user manual for the maximum resolution supported for each display connector. Some displays only support lower resolutions (such as 1024x768) when connected using analog VGA. Check the supported resolution of your display if you are connected using VGA.Extended Display Identification Data (EDID) does not pass through other connector types such as S-video, composite, RCA, component, or YPbPr. Your external display and your computer must have one of the following connector types: DVI, HDMI, VGA, or DisplayPort*. Video BIOS can only be updated through a system BIOS update. Or, check for instructions on how to update the system BIOS on your computer. Install the latest system BIOS for your computerĬheck with your computer manufacturer for the latest system BIOS and video BIOS with added support for the larger display mode.INF file for your monitorĬheck with your monitor manufacturer on availability of an updated. Install the latest Intel® Graphics Driver.Use the following suggestions to resolve your issue: The selectable resolutions on your computer depend on both the computer configuration and the resolutions supported by the monitor or display. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |